No-Drill Euro Licence Plate Holder – 520×112 mm NSW Number Plate Mount (No Holes in Plate, ASA)

No-Drill Euro Plate Holder — 520 × 112 mm

Mount a Euro plate without drilling a single hole through it. This two-part holder clamps the plate between a printed tray and a snap-on bezel, so the plate keeps its face and mounting holes untouched.

The tray splits into left and right halves that lock together with two bow-tie seam keys, then screws to your vehicle using its existing two M6 plate threads, 210 mm apart. The plate drops into the pocket and rests on the bottom wall. The left and right bezels press on from the front, hooking a rebate around the tray with 18 snap fingers and eight M3 lock screws — four underneath, four along the top edge. Nothing shows through the front.

• No holes through the plate — the plate is clamped, not drilled, screwed or riveted.
• Two-part assembly — split tray, two seam keys, left/right snap-on bezels, 18 snap fingers and 8 lock screws.
• ASA, made for outdoors — UV-stable and weather-resistant, with 4 walls and 25% gyroid infill; handles 60–70 °C panel heat.
• Hardware included — 8 × M3×12 pan-head screws included. Uses 2 × M6 countersunk screws (not included) into your vehicle's existing threads; length varies by vehicle.
• Fits standard 520 × 112 mm Euro plates — NSW, VIC, QLD, SA, WA, TAS, NT and ACT. Check your plate measures 520 × 112 mm before ordering.
• Perfect for anyone fitting a Euro plate to a car, 4WD, van or trailer without drilling the plate or using self-tappers through the face.

Specs: overall 535 × 124 × 12.1 mm; plate pocket 524 × 112.6 mm; material ASA; two printed plates; drainage notches; made to order in Australia; ships 7–10 business days.